
LE MARK MAGTAPE MATT 500 GAFFER RED - 50MM X 50M
Non-reflective matt finish — 1.9% reflection ratio
Residue-resistant adhesive — peels clean
Ships the next working day
Le Mark’s best-selling professional matt gaffer tape. A super-matt, non-reflective finish that disappears under stage and gallery lighting, holds firm through the run and peels clean at the get-out.
This roll: Red, 50mm × 50m. At 50mm it is the all-rounder for cables, floors and road cases.
Made for stage crews, venues and museum and exhibition teams: stage and floor marking, console marking, temporary cable securing and road case ID.
Buying for a production? Order 10 rolls or more for a discounted rate. Ask for a trade quote
Couldn't load pickup availability
Pickup currently unavailable at 26 Kallang Place, #06-16
Pairs well with
Product details
Everything a stage manager, crew chief or museum installer needs before ordering.
Features
- Le Mark’s best-selling professional matt gaffer tape
- Non-reflective matt finish, 1.9% reflection ratio
- Residue-resistant adhesive — peels clean*
- Durable 80-mesh cloth construction
- Tears easily by hand across length and width
- Write-on surface
- Flexible, conformable and durable
Applications
- Stage and floor marking
- Console marking
- Temporary securing of cables
- Road case ID
- Museum and exhibition installs
- Multi-purpose backstage use
Specifications
- Brand: Le Mark — MagTape®
- Range: Matt 500
- Roll length: 50m
- Widths in the range: 12, 25, 50, 75 and 100mm
- Colours in the range: Black, White, Silver, Red, Blue, Green, Yellow
- Finish: super-matt, non-reflective (1.9% reflection ratio)
- Construction: 80 mesh cloth
- Adhesive: natural rubber-based, solvent-free, residue-resistant
- Removal: peels clean*
*Performance figures are averages, not minimums, and may change over time. Refer to Le Mark’s technical datasheet before use.
Green-Vision
- Natural rubber-based, solvent-free adhesive
- Reduced chemical manufacturing
- Wood pulp-based fibres
- Recyclable core, made from recyclable materials
- Widely recycled packaging
Before you apply
- Apply to a smooth, clean, dry, non-porous surface
- Keep the surface free of dust, oil and contaminants
- Test on a small area first, especially on museum finishes
- Surfaces high in plasticisers may cause adhesive transfer
At a glance
1.9% reflection ratio
80 mesh cloth
Peels clean
50m roll
Non-reflective
Peels clean
Tears by hand
Write-on
80 mesh

Disappears under the lights.
A super-matt surface with a 1.9% reflection ratio throws no glare back at the audience or visitors. On the stage floor, in the wings or around an exhibit, the tape stays out of sight.

Holds for the run. Peels clean at the get-out.
Balanced for strength and clean removal, so it comes off floors, plinths and flight cases leaving minimal residue. Durable 80-mesh cloth tears straight by hand across the length and the width — no knife needed.
One roll, every department.
Trusted by stage crews and museum teams alike. Stage management, lighting, sound and exhibition installers all reach for the same roll.
Stage & floor marking
Spike marks, set positions and walkways that stay matt under stage lighting.
Console marking
A write-on scribble strip for lighting and sound desks.
Museum & exhibition installs
Holds cable runs and layout marks around exhibits without glare under gallery lights.
Cables & road cases
Temporary cable securing and road case ID that peels clean at the get-out.
MagTape™ Green-Vision assessed
Le Mark is working to make MagTape one of the most environmentally conscious tape ranges in the world.
Solvent-free adhesive
Natural rubber-based adhesive with no solvents.
Reduced chemicals
Reduced chemical manufacturing.
Wood pulp fibres
Wood pulp-based fibres in the cloth.
Recyclable core & packaging
Recyclable core made from recyclable materials, in widely recycled packaging.
FAQs
Will it leave residue on stage floors, plinths or display cases?
MagTape Matt 500 uses a residue-resistant adhesive that peels clean from most surfaces. Some surfaces, especially those high in plasticisers, can cause adhesive transfer, so test a small area first — particularly on museum finishes.
Which width should I choose?
12mm and 25mm suit console marking, labelling and fine spike marks. 50mm is the all-rounder for cables, floors and road cases. 75mm and 100mm cover wide cable runs and floor marking in one pass. Each width is listed as its own product.
Can I write on it?
Yes. The matt surface takes marker, which makes it ideal for console scribble strips and road case ID.
Is there a discount for bulk orders?
Yes. Orders of 10 rolls or more get a discounted rate. For production quantities, ask us for a trade quote.
How fast will my order ship?
In-stock orders ship out the next working day.
Can I collect from your office?
Yes, from 26 Kallang Place #06-16, Monday to Friday 11am–6pm. Please book an appointment before you come.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
We will ship it out the next working day.
-
Customer Support
Mon - Fri : 11am - 6pm
-
Contact Us
We look forward to serving you! We will get back to you as soon as we can within our business hours 11am - 6pm, but no later than 24 hours from now.
